Perchero y soporte para correo

Step 1
Measure and mark on the wood where cuts will be made at 9-1/4"x 24", 4-1/4" x 21", and 1-1/4" x 21".
Step 2
Cut along the marked lines on the wood.
Step 3
Sand all of the pieces of wood in preparation for staining.
Step 4
Apply stain to all of the pieces of wood and allow time to dry.
Step 5
Apply wood glue onto the support piece (1-1/4" x 21"), then press onto the backboard piece (9-1/4" x 24".)
Step 6
Use the 1-1/4" wood screws to fully attach the support piece to the backboard piece.
Step 7
Attach the front piece (4-1/4" x 21") to the support using 1-1/4" brad nails.
Step 8
Screw on each of the pieces of metal hook hardware evenly underneath the support/front piece.
Step 9
Screw on a d-ring hangers onto each side of the back side of the backboard.

Recommended Tools