18V ONE+™ AirStrike™ 15GA Angled Finish Nailer

Model: #P330

4.7 | 89 Reviews
The RYOBI® 18V ONE+™ System introduces the newest addition to the RYOBI AirStrike™ family of tools – the 18V ONE+™ Angled Finish Nailer. This 15 gauge Angled Finish Nailer features AirStrike™ Technology, which eliminates the need for noisy compressors, bulky hoses or expensive gas cartridges. This means faster setup and easier maneuvering on the job site or at home. Common applications for this tool include installing crown molding, hanging doors, stair treads and exterior trim. Tackle virtually any Finish Job with the capacity to drive up to 750 nails per charge using the P108 4Ah High Capacity LITHIUM+™ battery (sold separately). The AirStrike™ Angled Finish Nailer works with any RYOBI 18V ONE+™ battery (sold separately). The AirStrike™ lineup includes the 18V ONE+™ Brad Nailer (P320), the 18V ONE+™ Narrow Crown Stapler (P360) and 18V ONE+™ Straight Finish Nailer.
Ryobi three year warranty logo

This product is covered by a 3-year limited warranty.

The RYOBI 18V ONE+ System features over 175 unique products, giving you the ultimate in versatility and selection to get the job done.

View our current catalog for new product releases and the latest RYOBI savings!

Ryobi Help+

Your one stop destination for tips & techniques, manuals, troubleshooting, FAQs and more!

Specifications

  • Battery: 18V
  • Nail Gauge: 15 Gauge Finish Nails
  • Magazine Capacity: 105 Finish Nails
  • Nail Length: 1 in. to 2-1/2 in.
  • Nails per Charge using P108 Battery: 750
  • Fastener Collation: Glue Strip
  • Tool Weight: 6.8 lbs.

Includes

  • P330 Angled Finish Nailer
  • (500) 2 in. 15ga Angled Finish Nails
  • Belt Clip
  • Operator’s Manual

Reviews

18V ONE+™ AirStrike™ 15GA Angled Finish Nailer
18V ONE+™ AirStrike™ 15GA Angled Finish Nailer is rated 4.7 out of 5 by 88.
Rated 5 out of 5 by from I based my entire cordless buy on Airstrike Many start with a drill/driver or a tool bundle to establish an 18V system to build on. I started with nailers. I needed a finish and brad nailer and was pleasantly surprised to find 18V ones up to 15ga. I am very happy with all the nailers in the Ryobi range and they are consistently rated better than the Yellow and Red brands. I like the fact that it is still pneumatic, light, no kickback. The angled mag allows reach into tight spaces. As for the rest of their system, they are good homeowner level tools priced lower than most other name brand tools.
Date published: 2020-01-20
Rated 5 out of 5 by from Gets the Job done. I picked this Ryobi angle finishing nailer from Home Depot. I had been researching for a while for a cordless finishing nailer.This 15 gauge fit the bill. I wanted something strong with a big bite into the wood that was gonna hold my wood together. Also something that will fit into tight corners.While having other Ryobi tools, the battery platform for this tool only buy works great for me. When I do my Google search to compare tools reliability this nailer came in the top 10 all over Google searches. I would recommend this tool anyone that's looking for a angle finishing nailer to get the job done without any problems.I would definitely buy this tool again.
Date published: 2020-12-21
Rated 5 out of 5 by from Very handy finishing nailer I really like the convenience and power of this nail gun. It's much easier than pulling out my pneumatic gun and compressor. The built in compressor in the gun is very clever and it works great. This is actually my third gun. The first gun jammed often right after I got it so I returned it to the store. The second gun worked fine for a while then the striking pin would stick and I had to drive it back into the gun. The striking pin finally broke. I called Ryobi customer service to explain the problem and they sent out a new one right away. So far this gun is working fine.
Date published: 2019-06-21
Rated 1 out of 5 by from Failed after 2 uses Failed after 2 uses, sames as another reviewer, makes a hickup noise and no longer fires nails. Only used it for one project (finished trim on a shed) and failed halfway through the second project (building a raised garden bed)... so far impossible to contact ryobi for tool service (website errors and absolute trash phone contact) and have only owned this product for 9 months. way too expensive to last less than a year. I own MANY Ryobi tools and this one is dissapointing.
Date published: 2020-04-24
Rated 1 out of 5 by from First failing tool from Ryobi, for me! Today I attempted to use this product and it is just not firing. I use the P330 maybe 1x a month if that! the battery is fully charged and all it does is sound like it has the hiccups. The frustrating thing about this is this is the 4th one i have bough in less than 3 years! thats insane! they seem to last for a few months and then just have issues. I just cant call this nailer a good product based on the amount of times I have had issues with it.
Date published: 2019-03-18
Rated 2 out of 5 by from Great tool cause no hose compressor or fuel. Shoots small nails fine but 2 1/2 in 15 ga nails won’t shoot all the way in 1/2 in baseboard. Have to nail set every one. Battery fully charged and depth gage set all the way in still won’t set them. My only complaint
Date published: 2019-05-30
Rated 3 out of 5 by from Annoying Big downgrade in my opinion...within the first hour of using it the firing pin stuck in the out position...not that big of a deal but it does it every single pack of nails I put in it dont matter the company of nails that I use,, same.problem....just annoying.and the rear power adjustment moves and gets bumped to easily.....have the brad nailer...same problem with the jamming forsay but substantially less...
Date published: 2020-10-26
Rated 5 out of 5 by from Great nailer! I was given this nailer for my birthday so I could finish putting up trim work with our home remodel. What an awesome tool! I am very impressed with its power and the features it has. I did notice a difference in power with different batteries. For example with a 4ah battery I had to have different settings than if I was using a 9ah battery. The only con I can think of is the weight of it. If you were doing crown moulding, you would run into some hand fatigue quickly holding it up. That con is very outweighed by the pros of this tool.
Date published: 2019-06-13
  • y_2021, m_1, d_21, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_88
  • loc_en_US, sid_205792768, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_ryobi-tools

Support