18V ONE+™ Palm Router

Model: #P601 | Home Depot Sku #: 1001771844

18V ONE+™ Palm Router is rated 4.8 out of 5 by 161.

Rated 5 out of 5 by HurdleMillsJD from Very handy I’ve only used it one day but it looks like a winner. Very good speed and power, the LED light is very effective, plenty of visibility. Depth adjustment seems good and convenient. Not having a cord is a big advantage. Will not replace my old PC corded router and can’t power through lots of wood but for mortising hinges and small jobs it’s so much nicer than a big corded router. Hope it holds up, time will tell. All my other ONE+ tools are doing fine.

Date published: 2018-06-13

Rated 5 out of 5 by grover959 from Super Handy As a palm / trim router this has lots or power, is light weight and easy to use. It doesn't replace a full sized router, however it's so easy and convenient to use, I use it a lot more than my full size corded router. For light trim work with a round over bit, or installing laminate with a flush trim bit, it's size and power make it so easy to use and get professional results. One of my favorite uses is using it to to made dado cuts. Using a straightedge as a guide and flush trim bit it does a great job makes dado cuts in both plywood and hardwood.

Date published: 2019-08-10

Rated 3 out of 5 by Clocksinp from Not a standard base... I bought this to replace an earlier version I’ve one’d for a number of rears. The old one was hard to adjust up and down: this one totally fixes this, as well as adding an incremental adjustment. However, I took away points because the base has 1-3/8 opening that is too big for any reducer bushing set I can find on internet. I bought this specifically for sign making, but it doesn’t work with lettering stencils without the bushing. I even purchased a “universal” base plate, but the screw holes don’t line up”. If Ryobi would offer an alternative base plate with a 1-3/16 opening, this would definitively warrant a 5.

Date published: 2020-02-29

Rated 5 out of 5 by Fanofrskins from Great tool!! Works perfectly for a beginner!! All of my projects turned out excellent!!

Date published: 2020-03-17

Rated 5 out of 5 by David_LH from light weight but packs plenty of power The Ryobi One+ Palm Router (model P601) is my first router. I have used the router to modify some cupboard draws that required a combination of dodo cuts, rabbet cuts and roundover cuts. I found the bits easy to install in the collet and the depth adjustment was simple and precise, while the onboard LED conveniently illuminated the work area. The unit is light weight but packs plenty of power. I used third-party bits as the Ryobi Bit Set does not appear to be available in Canada. I am very happy with the palm router and I continue to tackle more challenging projects around the home.

Date published: 2019-10-07

Rated 4 out of 5 by bobmmp from powerful compact 18v router I bought this several months ago when I needed to do some work further than my extension cord would allow. Very powerful. Simply was using it for some round over work. I wish it come with an edge guide though which was avail on the ridgid. I would get a lot more use out of this router if it did come with a guide.

Date published: 2019-02-18

Rated 5 out of 5 by Robzbrz from First router I owned, what a great tool Use it almost daily for trim work and adding decorative edges to signs, furniture, and the like. Easy to use, easy to adjust, light weight, powerful. This is one of the best palm routers I have used. A definite upgrade from the older models.

Date published: 2019-04-02

Rated 5 out of 5 by JerryK70 from My Go To For Small Tasks. I received this tool as a Christmas present in 2018 to go with my other One+ tool collection. I have used it to route hinge mortises on 18-20 interior doors and 1 exterior door. I am currently building a 12'x20' deck and used my palm router to round over several deck boards which I had to rip to width, worked flawlessly. I find this router to be my go to for small jobs or where space is a concern. My only complaint is bit visibility when the body of the palm router is down low in the base but it wouldn't stop me from buying another if needed.

Date published: 2019-06-18

18V ONE+™ Palm Router Reviews - page 2

The RYOBI ONE+ 18V Palm Router is a new addition to the ONE+ family. Its convenient, portable size makes this tool a great addition to your collection of ONE+ tools. This palm router has micro-adjustment for precise depth control and cuts over 600 linear ft. per charge. With 29,000 RPM users receive fast, powerful trimming to get the job done. The quick release lever for easy depth adjustment makes this router one of the easiest to use on the market. LEDs also illuminate work surfaces for increased cutting visibility so your cuts are always precise.

Add to Wish List

Product Videos

Features

Cuts over 600 linear ft. per charge
Up to 29,000 RPM
Features micro-adjustment for precise depth control
Die-cast base for maximum durability
Quick-release lever for easy depth adjustment and base removal
LED illuminates work surfaces for increased cutting visibility
GRIPZONE over mold with microtexture for optimum grip and user comfort
Collet accepts all standard 1/4 in shank router bits

Battery: 18V
Bulb: LED
Collet Size: 1/4 in
Speed: 29,000 RPM (No-Load Speed)
Tool Weight: 2.8 lbs.

Palm router - Model p601

P601_958_trilingual_05.pdf
Published: 02-27-2020
Filesize: 3.51 MB

P601_958_r_02.pdf
Published: 07-06-2017
Filesize: 641 KB

Click the link below to access power tool replacement parts schematics and order parts online.

For those customers that prefer ordering by phone, simply contact the Ryobi master parts distributor at toll free 1-877-545-4099, and place your order over the phone.

Visit Ryobi Power Tools Parts Store

18V ONE+™ Palm Router

Model: #P601 | Home Depot Sku #: 1001771844