10 IN. Sliding Compound Miter Saw with Laser

Model: #TSS102L

4.7 | 161 Reviews
This RYOBI 15-Amp 10 in. Sliding Compound Miter Saw with Laser features 9 positive miter stops with ball and detent action for precision cuts. It has a 10 in. carbide-tipped blade for a smooth cut and an electric brake that stops the blade fast for added safety. The saw comes with an EXACTLINE™ Laser that provides a guide line for cutting. It also comes with table extensions that offer added support when you're working with large pieces.

Features

Ryobi three year warranty logo

This product is covered by a 3-year limited warranty.

View our current catalog for new product releases and the latest RYOBI savings!

Ryobi Help+

Your one stop destination for tips & techniques, manuals, troubleshooting, FAQs and more!

Specifications

  • Motor: 120V ~ 60 Hz 15 Amps Motor Speed: 5,500 r/min. (RPM)
  • Dust Port: 1-1/4"
  • Blade Arbor: 5/8"
  • Blade Diameter: 10"
  • 90º miter cut: 1-1/2” x 12” & 3-1/2" x 3-1/2"
  • 45º miter cut: 1-1/2” x 7-1/4”

Includes

  • TSS102L Compound Miter Saw with Laser and Carbide-tipped Blade
  • (2) Table extensions
  • Blade Wrench
  • Dust Bag
  • Work Clamp
  • Operator’s Manual

Reviews

10 IN. Sliding Compound Miter Saw with Laser
10 IN. Sliding Compound Miter Saw with Laser is rated 4.7 out of 5 by 160.
Rated 5 out of 5 by from Good saw for the money I’ve had this saw a few months and I will say I do like it. It took a little adjustment to get it to cut just the way I wanted but it was nothing a screw driver and a pair of pliers couldn’t fix. It’s very easy to use, saw cuts smooth as butter when especially when it is fixed to a work bench with a fresh sharp blade. The motor has plenty of power, tears through 4x4’s with ease. The dust collector bag works well but the surrounding areas will still get dusty so keep that in mind when choosing a place to set up. Overall it’s a great saw, I bought this one for $129 on sale at my local Home Depot and I’ve already got my money’s worth.
Date published: 2019-05-15
Rated 3 out of 5 by from Good but with one issue. For the price, this is a very good saw. The slide mechanism isn't extremely smooth. And I ended up returning it because the blade could not reach the bottom back part of square boards. Typical lumber with rounded corners worked fine. But if you had a square board it would not cut all the way through. Then it would splinter. I tried to adjust the fence forward, but it was already maxed out. To be fair, I had put on a new Dewalt 10" blade. So it's possible the blade it came with would cut all the way through, but I didn't bother testing that. I want the flexibility of using different blades.
Date published: 2019-04-29
Rated 4 out of 5 by from Missing set screws and holes for clamp Great saw for the money but mine is missing all the set screws for the clamp and no holes were drilled for it. Had to drill my own.
Date published: 2018-04-15
Rated 4 out of 5 by from Great saw with some minor flaws I purchased this saw about a year and a half ago and have used it for multiple projects. It cuts great and I love the sliding arm. But, I haven't had good luck with adjusting the laser guide. So I made a zero clearance insert for the arm and an auxiliary fence. Each one has a cut that I use to locate the kerf when making straight cuts. Also, I found that the fence was difficult to adjust. But, eventually I managed to adjust it but taking it completely off, cleaning some oil residue from the fence and the saw surface, and reassembling it. Overall, it's a pretty good performing saw for the money.
Date published: 2019-10-06
Rated 5 out of 5 by from Great Saw Great saw, I used it right away with ease. Built a work bench and storage shelves. Now on to more projects.
Date published: 2018-06-05
Rated 4 out of 5 by from 10" Sliding Compound Miter Saw Out of the box the saw seems to be put together very well. It was out of square both vertically and horizontally, so I had to adjust the stops. After getting everything square, I went to move the small pointer on the tilt head which shows the angle to align it with the zero and it cracked (it is just thin plastic). My only other complaint thus far is the included clamp, which is really finicky to get set up since it's just a knurled shaft that fits in a sleeve on the back side of the fence. Very odd. Overall though, this saw works very well and I'm excited to get more chances to use it.
Date published: 2019-05-06
Rated 5 out of 5 by from Excellent saw! I’m going to be honest and say that this saw was not the saw that I walked into the store with the intent to purchase. I had another miter saw on my list after I did a lot of research. However, when I got to the store I saw a deal that was too good to pass up on this saw and stand. I decided to take a gamble and make my first Ryobi purchase. I got the saw and stand home and set them up immediately. I changed the blade to a trusty Diablo, which I do on every saw I purchase. The stand is nice looking with the black and grey paint and is really solid and sturdy. The saw feels sturdy and looks solid at first glance also. Out of the box my saw blade and fence were square and the laser was accurate. Even if that wasn’t the case, adjusting these things are simple and the instructions for doing so are clear. I started my first project (a patio table) as soon as it was set up and I am very pleased with how the saw handled all the cuts that I threw at it. Overall I am extremely pleased with my unexpected first Ryobi purchase, and I can honestly say that I don’t think it will be my last.
Date published: 2019-05-06
Rated 5 out of 5 by from Excellent Product that I use all the time! I was hesitant to buy this chop saw as it was my first Ryobi product and I had a negative connotation that their tools were "cheap." After doing additional research, and checking out competitor items, I found that the Ryobi was just as stout and seemingly durable as competitors, but significantly lower cost. So I took the gamble, saved over $100 v other brands, and could not be happier. I have used this thing to cut everything from small finish wood to a 6" pressure treated post. I absolutely love it. I am not a contractor and use it for smaller home projects, but put it through it's paces while building a deck and an additional set of "deck stairs" where I was cutting a lot of pressure treated lumber.
Date published: 2020-10-30
  • y_2020, m_11, d_24, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_160
  • loc_en_US, sid_205216332, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_ryobi-tools

Support