The RYOBI 4” Drywall Repair Kit is a new, innovative way to repair drywall easily without calling a professional or investing in an abundance of supplies. Get the job done in less than half the time of a traditional repair with RYOBI’s three-step process! Drywall repair with the 4” Drywall Repair Kit is completed in 3 Easy Steps: 1.) Cover the hole with the template, pressing adhesive firmly to the remaining drywall. 2.) Using your drill, drill the hole saw into the drywall, using the template as a guide. Drill until the hole saw is flush to the wall. The hole saw will remain in drywall as the plug. 3.) Spackle over the hole saw, then sand and paint the area to complete the drywall repair.
- 3-Step Process is quick and easy to complete
- Simply cover, drill, and spackle to repair drywall
- Single-use hole saw is the drywall plug
- Get the job done in less than half the time of a traditional repair
- Single thread anchors hole saw into drywall for a secure repair
- (1) Drive Plate
- (1) Template
- (1) Hole Saw
- (1) Cover Plate
- (1) Mandrel with Black Oxide Pilot Drill Bit, and Instruction Sheet
4 IN. Drywall Repair Kit
4 IN. Drywall Repair Kit is rated out of 5 by 1.
Rated 2 out of 5 by Nuje from Almost useless I have now repaired 3 holes with this kit (plus 1 refill kit). Hence the “almost”. Every time the arbor loosens itself no matter how tight I secured the nut. This leaves with a big hole with the hole saw ready to screw itself into position. I ended up hammering the plug to get it in. I thought it was me after the first one so I re-read the instructions and watched the video. Learned nothing new. Either my arbor is faulty or this is, as I said, almost useless. At least it was cheap!
Date published: 2018-08-03