Looking for the perfect compliment to your larger tile saw? Look no further, the new 4” AC tile saw by Ryobi is the perfect match. Its power, versatility, and durability will out perform all of the hand held competition. Whether you’re out on the job site or at home in your garage, this saw will produce lasting and quality results every time. This saw will make your job a breeze, and before you know it you’ll be ready to start the next venture.
- Lock-on button reduces fatigue during prolonged cutting activity
- Powerful 12 amp motor cuts through ceramic, granite, marble and masonry
- GRIPZONE overmold technology with micro texture for increased comfort during prolonged use
- Bevel adjustment provides range of motion from 0° to 45°
- Depth of cut adjustment designed for fast and secure set-up of cuts up to 1-5/32”
- 12ft water supply hose with faucet adaptor for maximum convenience
- Motor: 120V, 12amp
- Motor Speed: 13,700 RPM
- Blade Arbor: 5/8”
- Blade Diameter: 4 inches
- Cutting Capacities: 1-5/32” at 90 degree angle; ¾” at 45 degree angle
4 IN. Hand-Held AC Tile Saw
4 IN. Hand-Held AC Tile Saw is rated out of 5 by 16.
Rated 4 out of 5 by Kidwarren from Works Great Purchased to rip large 48” tile works great with straight edge
Date published: 2020-10-21
Rated 4 out of 5 by Jwestfall from Great little saw Got the saw a few weeks ago has all the power you could want to cut through just about anything. The blade that came with the saw could of been alittle better and it is hard to line up the cuts the guard is in the way of your line of sight.
Date published: 2019-09-11
Rated 5 out of 5 by jtsaidc from Great saw at an amazing value! I bought this saw to do a porcelain tile job. Easily cut through 12" x 24" tile with no problem. Simple to connect to the hose, and the valve on the water hose that connects to the saw works good. I used the blade that came with the saw and it did a great job. Haven't tried any other blades with this yet. Purchasing the saw cost me just about the same as it would have to rent a wet saw for a day.
Date published: 2019-07-10
Rated 4 out of 5 by More4less24seven from I cut granite counter tops with this I bought prefab granite for kitchen and bath rehab jobs. My granite guy was so busy, I was afraid to lose the customer. I got this saw and cut out the farmhouse sink and cut the slabs for the bathroom vanities. I used prefab granite, so i didn't have to polish any surfaces. The saw did great. ONE PROBLEM! It doesn't cut at 90°. That means joining two pieces is hard
Date published: 2020-08-13
Rated 5 out of 5 by Jay F from Amazing Little Tool I have a 10" wet mitter saw to cut, but this little saw is perfect for glass, metal, tile, and rock backsplashes. It saved me about 7 hours of work, due to the mobility and versatility.
Date published: 2019-06-29
Rated 5 out of 5 by Yvonne Marie Hack from Great little portable hand-held tile saw I used it to cut two 12 x 24 inch tiles perfectly; the other three I cut too wide and will need to shave about 1/4 of an inch off-but, I'm confident using it now and that will be no problem. I am going to make a guide with a large piece of plywood so I can make perfectly straight cuts. The only issue I had with it is that once the water has covered your permanent pen marks you need to use other guides to continue making straight cuts.
Date published: 2020-03-07
Rated 1 out of 5 by barnaby6 from plastic parts not replaceable bought it, used it, water inlet to spray diamond blade broke - there are no replacement parts....just add water, instant garbage.
Date published: 2020-05-09
Rated 5 out of 5 by DeDwo from First Class I purchased this wet saw to cut pavers. I replaced the blade with the largest blade the saw would accommodate. The saw easily buzzed to within 1/4 inch of the thickness of the paver making it easy to snap the paver.
Date published: 2019-10-05