- SPM: 0 - 2,100 (no load speed)
- Cutting Angle: 0° to 45° both right and left
- Weight: 4.0 lbs.
18V ONE+™ Variable Speed Orbital Jig Saw
Model: #P521 | Home Depot Sku #: 336202Buy at The Home Depot
The Ryobi ONE+ 18-Volt Cordless Orbital Jig Saw is a lightweight saw that incorporates an Exactline laser guide system to help you make accurate cuts and a powerful motor that delivers 0 - 2,100 SPM. With ergonomically designed handles, this saw is built to offer a comfortable feel. With 4 orbital positions with base adjustment from 0 degrees to 45 degrees right or left, the saw can make an extremely wide range of cuts. The tool-less blade clamp allows for easy blade changes, and the variable-speed switch delivers higher speed with increased trigger pressure for custom cutting control.
Variable Speed Trigger
Variable speed trigger with electronic brake provides more control to cut a variety of material
Toolless Blade Clamp
Toolless blade clamp for quick and easy blade changes
Storage compartment located on the back of the saw provides onboard blade storage
4 orbital adjustment settings to make cutting through different materials more efficient
New and improved GripZone™ overmold for optimum grip and user comfort
All RYOBI 18V ONE+™ tools work with all RYOBI 18V ONE+™ batteries.
- P521 18V Variable Speed Orbital Jig Saw
- Operator's Manual
- *Battery and Charger Sold Separately
How do I adjust the base for angled cuts?
Using the same Allen wrench in the handle of your Jigsaw, loosen the two nuts on the underside of the base and re-tighten the nuts once it reaches the desired angle. There are also notched detents on the tool to indicate more common angles. Directions can also be found in your Operator’s Manual.
How do I adjust the speed of my Jigsaw?
There are two options to adjust speed. You can hold the trigger of the tool down and adjust the speed with your thumb dial. Or, using the trigger lock function, you can actuate the trigger, push in the side lock button, and adjust your speed with the thumb dial.
How do I use the Bladesaver function?
There is an Allen wrench in the handle of your Jigsaw and two lock nuts on the side of the tool. Take the wrench and turn each nut 1/2 turn until the base drops to your desired depth.
What orbital setting should I use?
Use your SpeedMatch sticker on the side of the tool as a guide. Setting 0 is the non-orbital setting and is recommended for very fine cutting of metal. Settings 1-3 are orbital settings, 3 being the most aggressive.
18 V Jig Saw with Laser - Model P521
18 V Orbital Jig Saw - Model P520
Click the link below to access outdoor products replacement parts schematics and order parts online.
For those customers that prefer ordering by phone, simply contact the Ryobi master parts distributor at toll free 1-877-545-4110, and place your order over the phone.Visit Ryobi Outdoor Parts Store