- Input: 120V AC
- 4.5 Amps
- RPM: 0-1,200 (no load speeds)
- Chuck Capacity: 1/16"-3/8"
- Weight: 3.8 lbs.
3/8" Variable Speed Clutch Driver
Model: #D47CKBuy at The Home Depot
From pictures to mirrors to shelves, there are a lot of tasks that require drilling around the house, and this 3/8 In. variable-speed drill is just the tool to help you accomplish them. A reversing trigger will come in handy when you have to get rid of the old before you can put up the new. 24 position clutch will allow you to sink screws to just the right depth to avoid stripping screw head or damaging material.
Keyless Chuck & Clutch
3/8" Heavy-duty keyless chuck and 24 position clutch controls torque output
Variable Speed Switch
Variable speed reversing switch
On-board bit storage
4.5 Amp Motor
4.5 Amp heavy-duty motor
- D47CK Drill
- 2 Double Ended Screw Driver Bits
- Tool Bag
- Operator's Manual
Can I use hex shank bits in a standard drill chuck?
Yes, just make sure the bit is seated straight before drilling or driving.
What clutch setting should I use on my drill or screwdriver?
The clutch should be set low to start and then turned higher to ensure the fastener is sinking to the proper depth without over driving. For all drilling applications, the clutch setting should be placed at the drill position.
Click the link below to access outdoor products replacement parts schematics and order parts online.
For those customers that prefer ordering by phone, simply contact the Ryobi master parts distributor at toll free 1-877-545-4110, and place your order over the phone.Visit Ryobi Outdoor Parts Store