Return to Product Listing

Reel Easy™ Replacement Bump Knob

Model: #AC04155T | Home Depot Sku #: 206251

Buy at The Home Depot
Large 76b99aed f179 473d b144 778e34cae12a
Large b6009def 5695 451d 8298 ae8dd885dff7
  • Tiny 76b99aed f179 473d b144 778e34cae12a
  • Tiny b6009def 5695 451d 8298 ae8dd885dff7

The RYOBI REEL-EASY Bump Knob is a dependable replacement knob for your REEL-EASY String Head. Simply replace the knob and continue with your trimming tasks.

  • share

Features
Specs
Includes
FAQ's
Parts

Easily attaches to the REEL-EASY String Head

Dependable replacement part

  • REEL-EASY Replacement Knob
  • REEL-EASY Replacement Knob

How do I advance the line on my REEL-EASY™ String Head?

Line advance is controlled by tapping the string trimmer head on grass while running engine at full throttle

  • Run the engine at full throttle
  • Tap the knob on ground to advance line. The line advances each time the knob is tapped. Do not hold the knob on the ground

NOTE: The line trimming cut-off blade on the grass deflector will cut the line to the correct length

NOTE: If the line is worn too short, you may not be able to advance the string by tapping it on the ground. If so, stop the engine and manually advance the line.

How do I manually advance the line on my REEL-EASY™ String Head?

  • Stop the engine and disconnect the spark plug wire to ensure you will not be harmed
  • Push the knob in while pulling on line(s) to manually advance the line

How do I replace the line on my REEL-EASY™ String Head?

  • Stop the engine and disconnect the spark plug wire to ensure you will be safe while replacing the line.
  • Rotate the spool clockwise as necessary to align the arrows on the spool.
  • Cut one piece of trimmer line at approx. 20ft. in length. Insert the line in the eyelet on the string trimmer housing. Push until the end of the line comes out the opposite side of the string head. Pull the line from the other side until equal amounts of line are on both sides of the spool.
  • Rotate the spool clockwise to wind the line on the spool until approx. 6 in. of line is showing on each side.
  • Push the spool retainer down while pulling on line(s) to manually advance line and to check for proper assembly of the on the string head.

Click the link below to access outdoor products replacement parts schematics and order parts online.

For those customers that prefer ordering by phone, simply contact the Ryobi master parts distributor at toll free 1-877-545-4110, and place your order over the phone.

Visit Ryobi Outdoor Parts Store