Return to Product Listing

18V ONE+ 9 in. Lithium-Ion Cordless Edger

Model: #P2310 | Home Depot Sku #: 1001504968

Buy at The Home Depot
Large 30fb23e6 55a5 4e33 9c1f c6f81038d6ac
Large 41204756 8d4d 4bdc b9d2 c6f6ff09e8d0
Large 94955e7a b22e 41bb a5aa 19a48ba95628
Large d67865d6 58be 4709 8e74 dc0293a77222
Large 06834c75 1c1c 4374 a71c 9d4ec87b1906
Large a38848d5 bc18 431a 8f88 d6bfe6c51d9d
  • Tiny 30fb23e6 55a5 4e33 9c1f c6f81038d6ac
  • Tiny 41204756 8d4d 4bdc b9d2 c6f6ff09e8d0
  • Tiny 94955e7a b22e 41bb a5aa 19a48ba95628
  • Tiny d67865d6 58be 4709 8e74 dc0293a77222
  • Tiny 06834c75 1c1c 4374 a71c 9d4ec87b1906
  • Tiny a38848d5 bc18 431a 8f88 d6bfe6c51d9d

Maintaining a crisp edge on a your lawn is a breeze with the RYOBI ONE+ Cordless Edger. This tool is perfect if you are tired of messing with gas or cords! Simply pop the battery in and your off and running! This edger comes with a 9" dual serrated blade and a 4-position adjustable depth control. The included lithium ion battery will ensure that you get fade free power from start to finish! Best of all, this battery can be used on any tools in the ONE+ family!

Over 70 ONE+™ Tools 3 Year Warranty

Product Videos

×
Features
Specs
Includes
Reviews
FAQ's
Parts
List aa398fc0 4b1b 4897 ba90 bb4c649efd09
RYOBI ONE+ Cordless Edger

Works with all Ryobi ONE+ tools and batteries

ONE+ 18-Volt lithium-ion battery and a 1-hour quick-charger included

4-position adjustable depth control

9 in. reversible edger blade

Light weight for user comfort

Front and rear wheel for added stability

Overmold handle for added user comfort

3-year warranty

Power Source: 18v Battery

Blade Length: 9 in.

Max Cutting Depth: 2.5 in.

18V Edger

Edger Blade

18v Lithium-Ion Battery

18v Charger

Operator's Manual

How do I adjust the blade of my edger?

  • Stop the engine and remove the spark plug wire
  • Loosen the adjusting knob and move the wheel arm up to increase the depth or down to decrease the depth
  • After adjustment is complete, tighten the adjusting knob securely
  • Replace the spark plug wire and start the unit

NOTE: Adjust the blade depth from 1/2 in. to 1 in. deep initially. Make a shallow cut to test the cutting depth. If the cutting depth needs adjusting, this should be

How do I store my edger?

  • Clean all foreign material from the product
  • Store the idle unit indoors in a dry, well-ventilated area that is out of reach of children
  • Always keep away from corrosive agents such as garden chemicals and de-icing salts

Note: Abide by all ISO and local regulations for safe storage and handling of gasoline

How do I stop the edger?

  • Release the switch trigger to stop the edger
  • Upon release of the switch trigger, the lock-out will automatically reset to the locked position

How do I Replace the blade on the edger?

  • Replace blades when worn down to indicator hole on blade
  • Remove the battery pack and wear gloves when handling blade
  • Align the slot in the flange washer with the slot in the gear case ring; place the holding pin through both slots to secure in place
  • Using the wrench (included), turn the blade nut counterclockwise to loosen
  • Remove the old blade from the motor shaft and clean debris from the edger shaft, flange washer and cupped washer
  • Center the new blade on the flange washer, making sure the blade sits flat
  • Properly install the cupped washer with the raised center area with the hole not touching the blade and the outer ring of the cupped washer touching the blade
  • Install the blade nut onto the motor shaft and reinsert the holding pin into the slots as described above
  • Using a wrench, turn the blade nut clockwise onto the edger shaft and tighten securely

WARNING: Always make sure the blade is correctly installed and securely fastened before each use. Failure to properly install the blade may result in serious personal injury.

How do I store the edger?

  • Remove the battery pack from the power head before storing
  • Clean all foreign material from the edger

NOTE: Store it in a place that is inaccessible to children and keep it away from corrosive agents such as garden chemicals and de-icing salts

Click the link below to access outdoor products replacement parts schematics and order parts online.

For those customers that prefer ordering by phone, simply contact the Ryobi master parts distributor at toll free 1-877-545-4110, and place your order over the phone.

Visit Ryobi Outdoor Parts Store
Lithiumplus sidebar p1111 Lithiumplus sidebar p2080 Lithiumplus sidebar p2660

Related Projects