Add Your Project



Welcome to Projects, your go-to page to see what other members are building.

All Projects



  • We are glad to see the plans from Shanty 2 Chic came in handy! It turned out really great! Do you mind expanding on how you bend your own metal??
    By RYOBI NATION, on April 4, 2018
    • No problem. I tried two ways and both worked well. 

      1. Using flat bar aluminum. I cut it to size and then measure where I want the angles to be. I used my drill press to drill holes in it before bending. Then I use my bench vise to hold it in place to hammer it to a 90-degree angle. ***depending on the thickness I use a little blow torch to heat the metal just at the angle.

      2. Instead of buying flat bar aluminum, just by the lumber ties in the lumber section of Home Depot. They are usually thinner, have multiple sizes, and have the holes pre-drilled. Cut it to size and repeat the steps above but without the torch.

      ***Be sure to sand down the edges of the cut aluminum and metal. Don’t want to put rough metal on a spot people will run their hands over. I use my Ryobi bench belt sander, but you can knock down the rough sports with an orbital sander as well.
      By bchaffin15, on April 4, 2018
    • Thanks for sharing your tips! It sounds like you have it all figured out!
      By RYOBI NATION, on April 5, 2018
View All Comments
  • Looks like this was a fun and quick project! Thanks for sharing!
    By RYOBI NATION, on April 4, 2018
View All Comments
  • This is beautiful!
    By Kirs10rae, on April 3, 2018
    • Thanks so much!!!
      By Ccottam, on April 3, 2018

  • Girllfriend, you rock!!!
    By Bizzybody7, on April 4, 2018

  • I love this table! I stained it after receiving it as a Christmas present.
    By VickiC, on April 7, 2018
View All Comments
  • Nice build! This looks great and we especially like the unique legs!
    By RYOBI NATION, on April 2, 2018
View All Comments
  • These are so nice! What stain/finish did you use since it's outdoors?
    By RYOBI NATION, on April 4, 2018
View All Comments
  • I love this! We are about to finish our basement with part being a workout room. This is great inspiration. I'm digging the color too. Thank you for sharing!
    By _Stephanie_, on April 2, 2018
    • Hi Stephanie:  Thank you for the comment!  The paint color is Behr Premium Plus Ultra Eggshell - P460-4 Lagoon Rock.  I hope your basement project goes well!
      By EJC5, on April 2, 2018

  • It looks so nice! Really awesome job with this!
    By RYOBI NATION, on April 2, 2018
View All Comments
1 2 157 158 159 161 163 164 165 1255 1256

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.


Add An Avatar:

Help your fellow Nation members get to know you by adding a picture of yourself to your profile.

Upload Image


Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:

Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image