This wall is made from scrap wood, but could be made from any type of wood. I used various lengths of 2×4s ripped in thicknesses from 1/4 to 1in. I put all the pieces through the thickness planer to get one smooth side and gave them a walnut stain. The pieces were then randomly attached to the wall with hot-melt glue. The project was not much fun to do, but I like the result ;)
The Ryobi tool used for this project was: Ryobi 10 in. tablesaw - RTS10
This wall is made from scrap wood, but could be made from any type of wood. I used various lengths of 2×4s ripped in thicknesses from 1/4 to 1in. I put all the pieces through the thickness planer to get one smooth side and gave them a walnut stain. The pieces were then randomly attached to the wall with hot-melt glue. The project was not much fun to do, but I like the result ;) The Ryobi tool used for this project was: Ryobi 10 in. tablesaw - RTS10