My mother needed a new bookshelf for all of her teachers school books, so I decided to try my luck at building one. I started by taking 3/4" plywood and marked the appropriate measurements for the base, sides, shelves, etc. I used my 18V Ryobi Circ Saw with Laser to cut the plywood. Next, I sanded the plywood pieces until it was smooth in preperation to stain the wood. When the staining was complete, I then used my Ryobi 18V Impact Driver and Ryobi 18V Compact Drill to secure the pieces together. This was an easy project for my first bookshelf and would recommend it to anyone looking for something simple to build.