shuffleboard table

by Dkenderdine

Feb 12, 2017

We had been looking into buying a shuffleboard table for our rec room. We found that it would be cheaper to build our own table. We wanted the table for a party that we were having with our friends and family. Our friends and family loved the table and had a great time playing some shuffleboard. We ran into some challenges with the felt and the angles of the legs, but we put our heads together and figured it out. we made some adjustments from the original plan, but it turned out great.

• Project Information

  • Difficulty:	Intermediate
    Categories:	Furniture, Recreation, Other

• Tools Used

  • HEX SHANK COUNTERSINKS - 4 PACK
  • 68 PC. SPEED LOAD+ DRIVING KIT
  • 18V ONE+™ AIRSTRIKE™ 16GA CORDLESS FINISH NAILER
  • 10 IN. SLIDING COMPOUND MITER SAW WITH LASER
  • 3 1/4 IN. PORTABLE HAND PLANER

• Materials Used

  • 1/2 PLYWOOD
  • 1 1/2 INCH NAILS
  • STAIN
  • SIDE BRACKETS
  • CORNER BRACKETS
  • 1 INCH TRIM
  • PIPE WASHERS
  • PIPE CLAMPS
  • 2FT COPPER PIPE
  • 3 IN LAG BOLTS
  • 4 IN LAG BOLTS
  • 2 1/2 INCH POCKET HOLE SCREWS
  • 1 1/2 INCH POCKET HOLE SCREWWS
  • 1 INCH POCKET HOLE SCREWS
  • FELT
  • 1X16X8 SHELFING
  • 4X4X8
  • 2X4X8
  • 1X2X8
  • 1X6X6