Ryobi Tools Truck Box
Tool-box for Ryobi tools. Box is on the driver side. All tools are Ryobi cordless 18V one+. First compartment houses Universal multi-tool base & 3 attachments: multi tool, angle drill and automatic hammer. Next is the rotary cutter. The cage on top contains: nails for nailer, multi-tool blades, sand papers for sanders, razor blades & flashlight. Lip on top holds extra long spade bits. On the bottom: wood, drywall and metal screws. The next compartment is my drill station. Hammer and driver drills, along with the sander and 4 batteries. The yellow boxes are magnetic and can be removed. One box has tips & other bits. On the bottom is a manual stapler. And in the lip on top are sawzall blades. The Next compartment contains the reciprocating saw, brad-nailer and radio. The little cage on the bottom holds specialty bits for mixing paint and drywall mud, a saw bit and the circle cutter attachment for rotary cutter. The back two compartments hold the circular saw and angle grinder. In the little cage: electrical and teflon tape, plumbers putty and grease, wire connectors grinder blades. There are cages in the front of the bed for my extension cords, then a flat-bar across the fender that holds paint thinner, spray lubricants and spray paints. There is a cage that holds 4 gallons and 6 quarts of paint. On the passenger side there are two cages. One from the front of the bed to the fender, holds rope, straps and drop cloths. The next cage goes to the end of the toolbox. It contains textures, caulking, roller covers, and in the back I have a paint tray, roller, and all the hand tools for drywall. There is some ABS pipe attached to the toolbox that can be used to store roller poles.