American Flag for a firefighter. All of the dark was burnt with a torch and then gone over with a stainless steal wire brush. After removing all the ash, I used a scuff pad to get the rest of the dust off. I finished it off nicely with 4 coats of semi-gloss spray lacquer. It is attached, with the Ryobi 18ga brad nailer, to a frame that was put together with pocket hole joinery.
American Flag for a firefighter. All of the dark was burnt with a torch and then gone over with a stainless steal wire brush. After removing all the ash, I used a scuff pad to get the rest of the dust off. I finished it off nicely with 4 coats of semi-gloss spray lacquer. It is attached, with the Ryobi 18ga brad nailer, to a frame that was put together with pocket hole joinery.