Return to Projects Listing
Rob's Dollhouse
I wanted to create a project that I have not seen created with a pallet.
Comments (6) Sign In To Follow Project
rgondeck11
Yes I did, It involved lots of cutting. I had to split the slats in order for them to be thin and not too heavy. That was probably 1 of the hardest parts, because not every slat wast the same thickness or width. The frame work was cut from the 2x4's lots of cutting there too. Down to 3/4". All of the small detail pcs like trim and stairs were very tasking, my saw blades were worn down by then.
RYOBI NATION
It sounds like a real labor of love. It definitely paid off. Thank you for sharing this project!
share
Project Information
Difficulty:
Easy
Category:
Crafts & Decor
Tools Used:
- 18V ONE+™ 4-1/2" Angle Grinder
- 18V ONE+™ Speed Saw™ Rotary Cutter
- 18V Compact LITHIUM+™ Battery
- 18V ONE+™ Lithium-ion Drill/Driver Kit
- 18V ONE+™ Lithium-ion Starter Combo Kit
- 18V ONE+™ Orbital Jig Saw
- 10” Table Saw with Steel Stand
- 18V ONE+™ 6-1/2 in. Circular Saw
- 18V ONE+™ 5 in. Random Orbit Sander
- 18V ONE+™ Reciprocating Saw
Materials Used:
1 pallet
This is an amazing project. The level of detail is very impressive- the stain on the roof and stair case is an especially nice touch. The pallet wood looks beautiful! Did you have to do a lot of prep work to the pallet wood to get it ready?