Comments (5)

• Can you share the material list also, fotos seem to do a prety good job of how to but sizes always help in making a wooden project

  
  

  Thank you and I will follow and await for an answer.

  
  

  John D
  

  By soutrnatl_17150, on June 1, 2020

• • John,
    
    Yes I will send dimensions and materials and my  rough plan idea I used.
    

    By KWinSC, on June 1, 2020

• The dimensions of this project.   24" wide x 40" long x 36" height.   Sorry I don't have any real plans but basically four pressure treated  4"x 4" at 36".  The base consist of  pressure treated 1" x 6" 4 of these at 24" and two at 40". For additional support two of the 24" 1" x 6" are screwed on the other sides of the 4"x 4" at the same height as the top of the base. This creates the tool well on the right side of the table. Unfortunately this was a late addition and not in the original pictures. I am adding finished pictures from underneath.  So an additional 1" x 6" approx 15.5" was used to create the bottom of the tool well.  I had consider putting a tool well on both sides but decided to just do the one on the right.   I believe the total number boards cut at 24" is 16 or 17 including the boards holding the shelf on the bottom. I was originally going to use brackets for this but decided to use 1" x 6" for more support there too.  I am adding additional pictures now.

  By KWinSC, on June 2, 2020

• Thanks for the additional info and material listing  this makes it a better project that can be started, thanks again.  Hoping Eric and Monty also respond with a little bit of help on their projects too.

  
  

  thanks again

  
  

  John D   soutrnatl_17150
  

  By soutrnatl_17150, on June 12, 2020

• You're welcome. It's an easy project. I'm trying to get better at being detailed on my projects. I know my be information was a little disjointed so if you have any other questions just let me know.

  By KWinSC, on June 12, 2020