I used the Ryobi cordless circular saw to cut 1/2 thick strips to had the sand evenly distributed before I laid the pavers down. by the way the strips started off at 10 feet long....
after the patio was completed, the wife wanted a raised garden for Mother's Day.
Back to Home Depot (after the paver, paver media, etc) for 2, 2x10x10 5/8th" lag bolts.
Using again the circular saw cut the wood at a 45% angle and then the cordless drill using a 5/8th" boaring bit to punch 8 holes though both the 49" long planks and 4x4 blocks to hold it all together.
The raised garden is currently on the saw horses to dry from the stain..
I used the Ryobi cordless circular saw to cut 1/2 thick strips to had the sand evenly distributed before I laid the pavers down. by the way the strips started off at 10 feet long.... after the patio was completed, the wife wanted a raised garden for Mother's Day. Back to Home Depot (after the paver, paver media, etc) for 2, 2x10x10 5/8th" lag bolts. Using again the circular saw cut the wood at a 45% angle and then the cordless drill using a 5/8th" boaring bit to punch 8 holes though both the 49" long planks and 4x4 blocks to hold it all together. The raised garden is currently on the saw horses to dry from the stain..
