Built a deck for the front of the house. We started with the intention of a simple 8x16 rectangular deck and ended up with a 22.5 long deck to fit the house. All the wood except for some of the 1/3 of the balusters and the pressure treated material is western red cedar that I harvested off of my property and had some mill it on a band saw mill. All the wood was then ripped to a consistent size on a bt3100, planed with a AP1301 and the edges rounded over with a 2 HP plunge router. Used my 18v drill and impact driver for the screws.
Built a deck for the front of the house. We started with the intention of a simple 8x16 rectangular deck and ended up with a 22.5 long deck to fit the house. All the wood except for some of the 1/3 of the balusters and the pressure treated material is western red cedar that I harvested off of my property and had some mill it on a band saw mill. All the wood was then ripped to a consistent size on a bt3100, planed with a AP1301 and the edges rounded over with a 2 HP plunge router. Used my 18v drill and impact driver for the screws.
