Cut pieces according to sizes on picture.
Using a router, cut dados in the board according to the measurements.
Cut a 45 degree angle on (1) of the 6” boards. Making sure the longest side measures 6”.
Lay the 3 pieces end to end. The right 6” piece should have the longest side facing up, the same as the dados. (as pictured)
Attach the boards using the hinges, making sure to center the hinge on the seams.
Build the part that will hold the recipe book/tablet. This should be 9" wide.
Attach to the recipe stand with wood glue and brad nails from the back of the 12" board.