Click here to download Rogue Engineer's blueprints for this How-To!
Cut the 2x4, 1x3 and 1x2 pieces according to the measurements on the plans.
Attach the 1x2 and 1x3 with wood glue and 1 1/4” nails.
Attach the “L” pieces to one 2x4, keeping the edge of the “L” piece flush with the edge of the 2x4, with wood glue and 1 1/4” nails.
Do the same with the other end of the “L” pieces.
Add the middle two 2x4’s. Space them 3.5” apart.
Add a finish, wait for it to dry and then distress it all over with a sander.
Add cute hooks and your favorite coffee mugs! Happy Building!
P.S. Don't forget to check out and enter RYOBI's February Project Contest!