Step 1
Measure 1-1/4" from one end of 1"x 3" boards. Then find center and mark for a drill point. Using a Drill Press and a 1-1/4" forstner bit, drill down 1/4". Some initial sanding can be done after cutting the boards and panels.
Step 2
Measure over 2-1/2" from end of board and cut.
Step 3
Repeat Steps 1&2, then cut and sand.
Step 4
Cut pieces that are 2-1/2" long.
Step 5
Measure over 5-1/2" from end and mark. Draw one half of a star, centered in between end mark. As shown in diagram. Cut inside of star pattern out using Jig Saw
Step 6
Repeat Step 5 to make other half of star.
Step 7
Align and center base board to star panels. Attach with glue and pin nails
Step 8
Align and center top tea light holders to star panels. Attach with glue and pin nails
Step 9
Sand and finish to your desire
Difficulty Level - Easy
Holiday Tea Light Holder
Light up your home for the holidays 🕯🎄 Get ready for cozy movie nights watching the holiday classics with this mood-setting holiday tea light holder set ⭐️
