• Home
  • Projects
  • Art
  • [#<Breadcrumb:0x00007f5126094c18 @title="Home", @path="/nation">, #<Breadcrumb:0x00007f5126094920 @title="Projects", @path="/nation/projects">, #<Breadcrumb:0x00007f512604b068 @title="Art", @path="/nation/projects/category/art">]

Custom center console


Davidbrwr44
Davidbrwr44
Davidbrwr44
Davidbrwr44

TOOLS AND MATERIAL.
Used 1/2" MDF board
1" Nails
Small drill bit
RYOBI 10" table saw
1/2" foam
Custom fabric
A router etc.

Made a cardboard rendering of what I was going to be cutting out of MDF board. Once design was finalized began making measurements for my first cuts. Measured twice cut once! Started piecing bit by bit as I was making my cut once all cuts were made began test fitting pieces. Once all was good began drilling pilot holes for nails to help strengthen the structure. Once nails were in used gorilla glue around seems to seal the console together. Once structure was complete started marking measurements for rocker panel position and air gauge positions. Used a router to make cuts. Test fitted each piece until satisfied with end result. Began spray glueing console and foam to start prepping for fabric. Once foam was dry began preppping fabric to be glue to the foam. After fabric was Glued began cutting holes in fabric for rocker panel and air gauges. Began test fitting pieces to ensure a nice fit!

Show More

Print Project

Comments (0)



Members Also Viewed

Print Options

Print Project

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.

Welcome to Ryobi Nation!

Please confirm your email address.

Welcome

Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:


Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image

Custom center console

by Davidbrwr44
Jun 17, 2017

TOOLS AND MATERIAL. Used 1/2" MDF board 1" Nails Small drill bit RYOBI 10" table saw 1/2" foam Custom fabric A router etc. Made a cardboard rendering of what I was going to be cutting out of MDF board. Once design was finalized began making measurements for my first cuts. Measured twice cut once! Started piecing bit by bit as I was making my cut once all cuts were made began test fitting pieces. Once all was good began drilling pilot holes for nails to help strengthen the structure. Once nails were in used gorilla glue around seems to seal the console together. Once structure was complete started marking measurements for rocker panel position and air gauge positions. Used a router to make cuts. Test fitted each piece until satisfied with end result. Began spray glueing console and foam to start prepping for fabric. Once foam was dry began preppping fabric to be glue to the foam. After fabric was Glued began cutting holes in fabric for rocker panel and air gauges. Began test fitting pieces to ensure a nice fit!