Add Your Project

  • Home
  • Projects
  • Workshop
  • [#<Breadcrumb:0x000000000a6d8490 @title="Home", @path="/nation">, #<Breadcrumb:0x000000000a6cfe58 @title="Projects", @path="/nation/projects">, #<Breadcrumb:0x000000000a655838 @title="Workshop", @path="/nation/projects/category/workshop">]

Combination Miter Saw/Table Saw/Router Bench on Wheels!


Bigcitywolf
Bigcitywolf
Bigcitywolf
Bigcitywolf

This was the first thing I made in my workshop... As I needed a place to do the work as I made my completed shop! I put locking wheels on it too, so I can easily move it around the shop (my garage) or even take it outside into the driveway as needed.

It has a spot for my miter saw, table saw, and I planned ahead and left a space for a future router. The space for the table saw is much bigger than I needed, but that was on purpose incase I ever upgrade to a larger one thats wider (the wood base can easily be made higher or lower also).

I don't think I'm 100% done with it, I see room for improvements that I can't wait to get to.

Show More

Print Project

Comments (11)


  • Nice bench. Like how you are planning out for the future with the router and larger table saw.
    By bchaffin15, on February 13, 2018

  • Looks great
    By DOUGLAS , on February 13, 2018

  • I love the idea of an attached multipurpose outfeed table!
    By uncleDub, on February 13, 2018

  • That's exactly how i wanted to have mine set up for the table n miter saw. Around how much did it cost you on the wood?
    By Edwin_Designs, on February 13, 2018
    • I got a little lucky that I already had some scrap wood (mostly the plywood and Masonite), I just had to buy 2x4s. But it was definitely under $100. And honestly, I think I over built it a bit, I could've gone with a single peice in places I used 2, and could've used 2x2s in some places too, to save money. But still not that expensive. The laminate sheet was the most expensive single thing.
      By Bigcitywolf, on February 13, 2018

  • I love the idea of an attached multipurpose out-feed table!
    By UNCLEDUB, on February 14, 2018

  • I like this idea of yours. What is the dimensions of your table top?
    By jaylord76, on February 18, 2018

  • Very nice setup! Where could I find plans for something similar to what you built? That would save so much room in my garage..
    By Donniewood1975, on February 18, 2018
    • No plans, I just winged it. I wish I had planned better, lol, but I am going back and adding drawers... I always love using all available space
      By Bigcitywolf, on February 20, 2018
    • Well I think winging it worked out great for you! That is a very nice project. I'm going to try my hand at something similar but I think I'm going to have to find plans to follow so I don't end up with a chicken coup instead of a miter saw / table saw table. Can you tell I'm still learning? lol.. Great work on this though....
      By Donniewood1975, on February 20, 2018

Members Also Viewed

Print Options

Print Project

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.

Welcome

Add An Avatar:

Help your fellow Nation members get to know you by adding a picture of yourself to your profile.

Upload Image

Welcome

Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:


Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image

Nation logo

Combination Miter Saw/Table Saw/Router Bench on Wheels!

by Bigcitywolf
Feb 13, 2018
Medium 0d5681b0 45f2 4076 8abf b019893d03bd

This was the first thing I made in my workshop... As I needed a place to do the work as I made my completed shop! I put locking wheels on it too, so I can easily move it around the shop (my garage) or even take it outside into the driveway as needed. It has a spot for my miter saw, table saw, and I planned ahead and left a space for a future router. The space for the table saw is much bigger than I needed, but that was on purpose incase I ever upgrade to a larger one thats wider (the wood base can easily be made higher or lower also). I don't think I'm 100% done with it, I see room for improvements that I can't wait to get to.