Coffee table made from salvaged redwood (old picnic table) and cherry stained/hi-lited grain pattern 1/2" plywood. Coffee table measured 26"W x 44"L x 18"H. Table legs are 3" x 3" (glue-ups) while side supports are 3/4" x 2". Plywood top was centered into the redwood 1" x 3" boards using a dado; table top stiles and rails used pocket holes while side supports were glued and brad nailed into legs fitted with a lap joint cut into them. Table top was secured to side supports with pocket holes. Four coats of MINWAX water-based polycrylic used on all of table but 6 coats on plywood top.