Measure out your cuts for the front pieces of the coat rack, and make your cuts.
(4) cuts of 11 in.
(2) cuts of 20 in.
(1) cut of 23 in.
(1) cut of 3-1/2 ft.
You can arrange your boards however you prefer. For our arrangement, we placed the one 23 in. board in the center, 2 of the 11in. boards on the left and right, 2 of the 20 in. boards to the left and the right, and then finished the ends with the other two 11 in. boards.
Center and glue your 3-1/2 ft. backboard onto your arrangement.
To attach the backboard, drill pilot holes through the center over each front panel, and fasten with 1-1/2in. screws.
Sand your coat rack and finish with your choice of paint or stain. Attach your hooks with the included hardware, and enjoy