Easy Affordable One Sheet Plywood Storage Shelves
Cheaper, stronger, and better looking than most shelving units available and super easy to make. Made from one single sheet of 3/4" plywood. The finished shelve is 64" tall, 32" wide, and 16" deep. Mine only has 3 shelves, but there is enough in the sheet to have 4 if you desire. For a little style I added a face frame of 3/4" thick pine. The hole thing was assembled using Kreg screws and coated with polyurethane to keep it looking good. Hint: Hang your selves a little off the ground and it will be much easier to clean the floor!
One 3/4" sheet of oak plywood
Two 8' pieces of 1x3 pine for the face frame outside stiles and rails
One 6' piece of 1x4 pine for the face frame inside stile
1-1/4" Kreg coarse screws
Water based polyurethane