LOG END TABLE
I have often watched logs burning in a fireplace and wondered what the wood could have become. I purchased these logs for $2 a piece from a guy selling firewood on Craigslist. He claimed they are white oak but I am not sure. By stripping off the bark and sanding the log smooth I created a nice piece that can be used as a stool or as a side table. What’s great about this project is that you can make a something for less than $10 that sells at furniture stores for more than $200.
Cut the log.
Trim the ends of the log to get reasonably flat end surfaces. Chainsaws are not most precise tools so just do your best and rely on the angle grinder to fix the mistakes. Make sure the log is secure and will not move while you cut it. Always use the appropriate safety gear.
Remove the outer layers of bark.
I used a hatchet to remove the outer layer of bark. A hammer and chisel work will also work.
Remove the inner layer of bark.
I used an angle grinder with a 40 grit flap disc to remove the remaining bark.
Sand it smooth.
I start the finishing sanding with the angle grinder and 100 grit flap disc before switching to hand sanding and my orbital sander with 220 grit paper to finish it.
Polyurethane or acrylic will protect wood with a hardened plastic finish but I would rather have stains and scratches than the feel of plastic. I used a natural wood counter finish made from linseed oil and beeswax. It provides protection without toxicity.
Comments (0) Sign In To Follow Project
Salvaged firewood logs