Return to Projects Listing
SHUTTERS
  • SHUTTERS

SHUTTERS

This past Fall we tackled our backyard and transformed it into an outdoor space for a one-of-a-kind look. One of the main elements we brought in were handmade shutters, for a great customized, detailed look. This little project is relatively basic to build with major impact to any home or space in need of a little love. From wider looking windows to added warmth and instant character, you'll be amazed at how quickly it changes the entire feel of your home.

Steps


Supplies per shutter:

(30) #6 1 & ¼ inch exterior wood screws
(2) 1 x 4 x 8’s wood (type of your choice)
(3) 1 x 6 x 6’s wood (type of your choice)
(4) 2 & ½ inch screws exterior (type depending on your house, see below.)

Starting off you will need to measure the length of your window. Do not make the mistake of assuming your windows are the same size as ours. If you do, you’ll have some pretty cool shutters, but they just might not fit your window. ;}


×
Medium 9aa3bc16 2026 4068 9510 e9518f501766

Once you know the length of your window cut your 1 x 4’s and 1 x 6’s down to that size. For us, this meant we would cut ours down to 5ft. This gave us (3) 1 x 4 x 5’s and (3) 1 x 6 x 5’s. Remember your length may be shorter or longer than ours.

Also cut the leftover 1 x 4’s to 9 & ½ inches (if your window length is longer than ours you might need to buy extra wood.) You will need (3) 1 x 4 @ 9 & ½ inches.


9aa3bc16 2026 4068 9510 e9518f501766
×
Medium 97f6107f 59b8 4076 809b b6268a72748f

Once everything is cut, you will screw (1) 1 x 4 to (1) 1 x 6’s. (Use 6 screws alternating front to back as you work up the board.) Make sure that they are flush on one long edge and at the top and the bottom, then screw them together. Repeat this with another set. (You can do this safely using a clamp, laying them face down with the 1 x 4 on the bottom and the 1 x 6 resting on top of it. Hold them flush as you screw them together.)


97f6107f 59b8 4076 809b b6268a72748f
×
Medium 14c3de95 e11f 4f66 abcc e10338d2a3d5

Take your (3) 1 x 4 @ 9 & ½ inches and lay 1 at the bottom of a pair you just joined, 1 at the top and one in the middle. Hold them flush to the 1 x 4 sitting on top of the 1 x 6 and screw them in (make sure to screw them in from the back side). Use two screws each time you screw the 1 x 4 @ 9 & ½ inch piece to the 1 x 6 piece. (6 on each board)


14c3de95 e11f 4f66 abcc e10338d2a3d5
×
Medium e352906c 22f8 49ac 9a94 8d2d566e27d8

Now slide the other 1 x 6 x 5 that is joined to a 1 x 4 flush to the 1 x 4 x 9 & ½ inch piece and screw it in from the back side. (Again 6 screws, 2 on each 1 x 4 @ 9 & ½ inch.)


E352906c 22f8 49ac 9a94 8d2d566e27d8
×
Medium a13a4908 a4f1 499a a2bf 0de7fd3e0ed8

Finally, take the remaining 1 x 6 x 5, slide it in flush, and screw it in from the back side. (Again 6 screws, 2 on each 1 x 4 @ 9 & ½ inch.)

Take a little extra time to sand any rough edges. Use some wood conditioner and stain to a shade of your liking to finish them off with a look that works for your home.


A13a4908 a4f1 499a a2bf 0de7fd3e0ed8
×
Medium 530092c7 7c05 4eb3 bf18 c327411d59d2

Once they are dry, you are ready to attach them to your house. The type of screw you will need will depend on the type of material on the outside of your house. Make sure you get the correct screw and drill bit. The guys at your local Home Depot store can help with this.

Because you'll need an extra pair of hands, we suggest you get your spouse or neighbor to help you. You’ll thank me for it later. Also, if you have two drills or can borrow an extra one you’ll want to get your hands on it. This way you can drill with one and screw with the other for a faster process.

Line up the shutters with the top of the window and drill through the shutters into the side of your house. (I suggest starting with the top corner closest to the window.) Go ahead and put a screw through that hole. Break out your level and make sure the shutter is level, then drill and screw your other three holes.


530092c7 7c05 4eb3 bf18 c327411d59d2
×
Medium 31eadf9e d0d6 410c 896f 65bcd83bd199

Now step back pour a glass of sweet tea and pat yourself on the back for a job well done. You're finished... and if your house is anything like ours, these shutters make a major improvement.


31eadf9e d0d6 410c 896f 65bcd83bd199
×
The Handmade Home

The Handmade Home

All Projects | Profile


  • share

Project Information

Difficulty: Easy
Category: Crafts & Decor,

Materials Used:

  • (30) #6 1 & ¼ inch exterior wood screws

  • (2) 1 x 4 x 8’s wood (type of your choice)

  • (3) 1 x 6 x 6’s wood (type of your choice)

  • (4) 2 & ½ inch screws exterior (type depending on your house, see instructions.)

  • also by The Handmade Home


    Related Projects


    Recently Viewed Projects


    Forgot your password? Click here.

    Don't have a RYOBI Account? Sign Up Now.

    ×