Ana White

Difficulty

Hours

Cancel
  • How much did this cost??
    By Tracy relyea, on January 19, 2018

  • I love your work. I was wondering, can you elaborate on how to attach the middle shelf? For instance what do you mean by toenail?
    By CraftyFiddler, on June 7, 2018
View All Comments
Cancel
  • Awesome project Ana. Thanks for being so detailed! Can't wait to see what you roll out next.
    By RYOBI NATION, on December 11, 2017

View All Comments
Cancel
  • Seem's your top piece would be 17, 3/4 to allow for overhang, unless you put strips along top for overhang. Can you clarify please? Thanks!
    By rabbottfl, on December 19, 2017

  • Gorgeous 😍😍
    By Kosasin, on June 4, 2018

  • Where did you get the baskets pictured with this console? Thank you
    By Gerryyo, on September 4, 2018
View All Comments
Cancel
  • No plans?
    By RMBrumfield, on September 19, 2019
    • You have to hit the tabs
      By Mike411, on January 27, 2021
View All Comments
Cancel
  • If you are building a horizontal closet, make sure you build small enough to fit through the closet opening without damaging drywall. Our closet opening is 5 feet wide, and the closet interior was 6 feet wide, so I built this closet in the middle - just under 5-1/2 feet wide and it fit in easily. Do measure and double check. Good luck building and please share, it's a big deal seeing your amazing projects! XO Ana
    By Ana White, on October 18, 2017
View All Comments
Cancel
  • Would love an explanation on the leg cuts: "2 – 2x3 @ 72” (can also use 1x3 or 2x4 if 2x3s cannot be sourced) – both ends cut at 10 degrees off square, long point to short point, ends are parallel" and then Step 4: Top Ends of Legs Use a square to mark back top edges of legs perpendicular to top 10 degree cut, so 6” is cut off at back side. Cut with circular saw Completely baffled by these cuts. Thanks Mike
    By msutherland29, on October 25, 2016

  • Hi Mike, sorry for the confusion. First, set your miter saw to 10 degrees off square. Then cut the 2x3s so both ends are cut at 10 degrees off square, the ends are parallel, and the length is 72" from the long point to short point, following one edge of the 2x3. Then use a speed square to mark the back where the shelf will sit against the wall square to the top as done in step 1 of this plan http://www.ana-white.com/2015/08/free_plans/leaning-ladder-wall-bookshelf Hope this makes sense.
    By Ana White, on October 25, 2016

  • 2 questions..... 1. Why is that last cut 6 1/4" when all the rest are to the inch 2. Are the feet cut on an angle to sit flush on the floor?
    By Jpurdie, on February 10, 2017

  • Hi, sorry for any confusion. The 6-1/4" comes from 5-1/2" wide 1x6 plus 3/4" to equal 6-1/4" The other cuts are even numbers because the board widths for 1x10 and 1x8 are 9-1/4" and 7-1/4" wide. Yes the bottom legs are cut at an angle to sit flat on floor.
    By Ana White, on February 10, 2017

  • If I don't have brad nailer, will I be able to do this with a good old hammer and nails?
    By sgcolligon, on June 30, 2017

  • I have a narrow space behind my toilet. This would work perfect, but I need to adjust it to fit 21inches wide total. Could you help me figure this out. Thanks :)
    By MED, on August 10, 2017

  • Good evening, I am using this plan to add some much needed storage to a bathroom and the 10-degree cuts do not seem to make sense for both the top and bottom. If I cut the bottom at 10-degrees off square, my measurement at 72" (starting 6" from the top) would be at 21.5-degrees off square. Unless I am looking at this incorrectly. I am also using Google Sketchup to visualize my build based on the instructions before I begin. Thank you.
    By JWest82, on March 14, 2018
    • Nevermind... looks like my angles somehow were messed up...
      By JWest82, on March 14, 2018
    • I can’t figure out what I’m doing wrong with the top angle please help!!!
      By TonyJones, on March 9, 2020
    • @TonyJones  you still having issues? I’ll be doing this soon and I’m pretty sure it’s related to a ladder shelf build I did from Ana White’s website so I know how to make that cut at the top. You can email me at gilly775(at)gmail.com where you put the @ symbol instead of (at) in the email 

      Brian
      By Briangw, on September 26, 2020 (edited)

  • I’m having a hard time understanding how to cut the angle at the top of the 2x3. 
    By Stephen5, on October 23, 2018
    • Did you figure it out?
      By TonyJones, on March 9, 2020

  • This was a super easy project.  Thank you for posting these.  This is how we used them: https://youtu.be/WwsD7902Y_4
    By KimAndGarrett_makeIt, on February 26, 2019
View All Comments
Cancel
  • Where are the measurements for the cuts?
    By aubriee, on June 3, 2016

  • Also where did you get the fabulous cushions for the sectional? Love them!
    By aubriee, on June 3, 2016
    • Did anyone ever answer this question?
      By angalexava, on February 17, 2017

  • Thanks for adding the download with the measurements.
    By aubriee, on June 4, 2016
    • I can't find the measurements. Where did you find them?
      By Nancybo, on June 4, 2016

  • I'm soooo looking forward to my first build. Thanks for making this so easy. For those of you looking for the measurements up at the top is a link. Right Below "Outdoor Coffee Table" is the link.
    By crozzby, on June 21, 2016

  • There is a link to the plans with measurements above the Steps section. Love this project!
    By _Stephanie_, on June 24, 2016

  • Why would you stain before making your cuts!?!?!?! Now you have to get the stain out again!
    By Spookypook, on June 26, 2016

  • Hi, Where are the cushions from? Love them!!!!
    By angalexava, on February 17, 2017
View All Comments
2 4

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.

Welcome to Ryobi Nation!

Please confirm your email address.

Welcome

Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:


Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image