DOWNLOAD AND PRINT PATTERN
a. Download patterns from the PDF above
b. Print your selected pattern(s) on standard 8.5” x 11” paper
CUT PLYWOOD AND PAPER PATTERN
a. Use a circular saw to cross cut the full sheet of plywood down to 8.5” x 11”.
b. Cut out the paper pattern(s) using a pair of scissors
c. Place the cutout on the 8.5” x 11” piece of plywood and use a pencil or marker to trace the inside and outside shape of your pattern
CUT THE SHAPES
Using a scroll saw, cut out the shapes you traced.
SAND AND CLEAN SHAPES
a. Using a sander, sand the edges and flat surfaces of the shapes. (Make sure all rough or splintered areas are smoothed out)
b. Using a workshop blower, clean off the shapes and workspace
Paint the ornament. (Wait until the paint dries before completing the next step)
ATTACH CUP HOOK
For the final step, screw the cup hook into the top of the ornament.
Now the project is complete!