Add Your Project

  • Home
  • How To's
  • Construction
  • [#<Breadcrumb:0x00007f7e22d2da28 @title="Home", @path="/nation">, #<Breadcrumb:0x00007f7e22d2d690 @title="How To's", @path="/nation/how-tos">, #<Breadcrumb:0x00007f7e34a23b90 @title="Construction", @path="/nation/how-tos/category/construction">]

Herringbone Inserted Travertine Tile


Her Tool Belt
Her Tool Belt
Her Tool Belt
Her Tool Belt

Flooring for your home can cost a lot of money. Just because you are on a budget doesn’t mean you have to have boring cheap looking floors. Add style to your home with budget travertine tile in an awesome pattern. The travertine 16” x 16” (natural stone) used for this project is only $1.66/sq-ft at Home Depot. Most of the cost of tile floors comes from the labor, and you can do that yourself!

Find more home improvement tutorials at http://www.hertoolbelt.com

Show More

Print Options

  • More Information, Tools, & Materials

    • Project Information

    • Materials Used

      • TRAVERTINE TILE 16"X16"
      • THINSET
      • CEMENT BOARD
      • CEMENT BOARD SCREWS
      • GROUT
      • NATURAL STONE SEALER
  1. Project Steps

    1. Step: 1

      Large 41c9929f 7d07 47e8 939a 4f28a8dbc88b

      Pick a floor pattern, in this tutorial I am using Herringbone Inserted with 16” x 16” travertine tiles. Determine square footage of the area that you are laying tile. Area is measured by Length x Width = Area. length in inches x width in inches = area in square inches divide that by 144 to get square feet. When buying your tile, you’ll want to order about 15% extra to account for cracked tiles, edge pieces, etc. Multiply the square footage of your room by 1.15 to get the amount of tile that you should buy.

    2. Step: 2

      Large 552433a8 56ed 4f2e 8d13 a3a748a18297

      If using natural stone, rinse all of the tiles off and let them dry. Then apply natural stone sealer to the finished face of the tiles and allow to dry.

    3. Step: 3

      Large 23389aea cc3c 4cab a2e4 d4b389ec009a

      An important part of any tile floor is the cement bed under the tile. There are a number of different products out there for the cement bed. I use ¼” Hardiebacker cement board. Cement board is an easy to use product for the DIY-er. Before laying the cement board, scrape your floors removing high spots. Mix thinset mortar in a 5 gallon bucket according to the bag. You’ll need a ½ inch drill and a thinset mixing paddle. Evenly spread the thinset on the plywood floor using a ¼” x ¼” x ¼” square notch trowel. Hold the trowel at a 45 degree angle on the last pass.

    4. Step: 4

      Large 7d3cae0a 99db 4ad0 89c7 deee0317885d

      Lay the cement board on the thinset and use 1 ¼” cement board screws (I prefer Rock-on) to secure the cement board every 8”, make sure the screw head is flush or lower than the cement board. A Ryobi impact driver is essential for this part. When laying the cement board stagger them, you should never have 4 corners meet. Never lay a seam of cement board on a seam in the plywood. If this is going to happen, cut your cement board to miss the plywood seam. Leave a 1/8" or so gap between cement boards and between wall edges. Try and remove any thinset squeeze out while wet. Let the thinset cure for a 24 hours before laying the tile.

    5. Step: 5

      Large 088fc208 3f2e 45ee 9e2c 9083c4e90ed1

      Fill the cement board gaps with thinset, and then apply the 2" glass seam tape over the joint. Cover the seam tape with thinset, and smooth the joint. Try not to leave high points.

    6. Step: 6

      Large 636c8bf3 1b93 45a9 accd 5ca0263be6e8

      Time to cut tiles! For the herringbone inserted, mark the tiles in half (8”) and for every 2 tiles that you cut in half cut 1 tile in quarters. When making the cuts you can either mark the cut lines with a pencil or set up your saw fence for repeat cuts.

    7. Step: 7

      Large ba969830 702b 49bf b7d1 ac8d51a0d2ba

      Fill your tile saw reservoir with water, check and refill the reservoir after every 4-5 tiles. When cutting natural stone, I like to make a small cut on one end, then turn the tile around and make the cut. This helps with breakout of the stone. Rinse the tiles with water after cutting.

    8. Step: 8

      Large 4b5d28b4 31a7 4991 a730 3fda066ae2e6

      Decide how you want your floor laid out. Use chalk lines to mark straight lines. For this layout using 16” x 16” tiles and 1/8” tile spacers, the spacing between center-lines of the diamonds is about 17 1/8”. These are the reference lines that keep the pattern going straight.

    9. Step: 9

      Large eb1933ed 7841 4c54 b7dd 51998cbcaea6

      Mix a batch of thinset according to the instructions on the bag. Spread the thinset with a ¼” x 3/8” x ¼” trowel. Begin setting the travertine tiles in the pattern. If your travertine tiles are very holey on the backside, it will be easier to keep your tiles level by filling the holes with a thin coat of thinset.

    10. Step: 10

      Large 4fca5c7a b51a 4d00 8268 d6a8a76dc148

      Check and make sure your tiles are level. If you have a dipping edge that you can't get level, sometimes you can lift the edge with your spatula and put a glob of thinset under it, and lay the tile back down and level it. As you lay the tiles, your thinset may start getting dry. The thinset it too dry when you lay the tile on the troweled thinset and lift it up, if the thinset doesn't leave messy lines and adhere to the tile bottom don't continue to use it. Make a new batch.

    11. Step: 11

      Large 68b8d19f 3b46 448d afff 3daecf778ef5

      Allow the thinset to cure for 48 hours before walking on the tiles and grouting. The general rule of thumb for grout, is lines larger than 1/8" use sanded grout and lines 1/8" and smaller use unsanded grout. I prefer to do small batches of grout at a time, ¼ of the bag. Using your grout float, fill the grout line very full of grout. With the side of the float, squeegee off the excess grout. Let the grout lines dry for a while 30 min to 1 hr.

    12. Step: 12

      Large 7cb265d4 3e5a 4c51 a5f0 4a851a1a0d31

      With an extra large orange grout sponge and a bucket or large bowl of clean water, wipe up the excess grout. Keep wiping until the grout is at the height that you prefer, generally just below the top of the tile. Change your water often and wipe all of the residue from the grout off of the tile. Let the tiles dry for a couple of days. Clean the tiles again really well with water and a sponge. Let the water dry and reapply the natural stone and grout sealer according to the instructions on the bottle.

Comments (1)


  • This looks wonderful and I love herringbone patterns. The tutorial is easy to understand. Great job
    By yellowRose, on March 3, 2015

Members Also Viewed

Print Options

Print Project

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.

Welcome to Ryobi Nation!

Please confirm your email address.

Welcome

Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:


Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image

Nation logo

Herringbone Inserted Travertine Tile

by Her Tool Belt
Feb 19, 2015
Medium a9eebf51 2e9f 45ac 8ccc b257ded2e48c

Flooring for your home can cost a lot of money. Just because you are on a budget doesn’t mean you have to have boring cheap looking floors. Add style to your home with budget travertine tile in an awesome pattern. The travertine 16” x 16” (natural stone) used for this project is only $1.66/sq-ft at Home Depot. Most of the cost of tile floors comes from the labor, and you can do that yourself! Find more home improvement tutorials at http://www.hertoolbelt.com

Project Steps

  1. Step: 1
    Huge 41c9929f 7d07 47e8 939a 4f28a8dbc88b

    Pick a floor pattern, in this tutorial I am using Herringbone Inserted with 16” x 16” travertine tiles. Determine square footage of the area that you are laying tile. Area is measured by Length x Width = Area. length in inches x width in inches = area in square inches divide that by 144 to get square feet. When buying your tile, you’ll want to order about 15% extra to account for cracked tiles, edge pieces, etc. Multiply the square footage of your room by 1.15 to get the amount of tile that you should buy.

  2. Step: 2
    Huge 552433a8 56ed 4f2e 8d13 a3a748a18297

    If using natural stone, rinse all of the tiles off and let them dry. Then apply natural stone sealer to the finished face of the tiles and allow to dry.

  3. Step: 3
    Huge 23389aea cc3c 4cab a2e4 d4b389ec009a

    An important part of any tile floor is the cement bed under the tile. There are a number of different products out there for the cement bed. I use ¼” Hardiebacker cement board. Cement board is an easy to use product for the DIY-er. Before laying the cement board, scrape your floors removing high spots. Mix thinset mortar in a 5 gallon bucket according to the bag. You’ll need a ½ inch drill and a thinset mixing paddle. Evenly spread the thinset on the plywood floor using a ¼” x ¼” x ¼” square notch trowel. Hold the trowel at a 45 degree angle on the last pass.

  4. Step: 4
    Huge 7d3cae0a 99db 4ad0 89c7 deee0317885d

    Lay the cement board on the thinset and use 1 ¼” cement board screws (I prefer Rock-on) to secure the cement board every 8”, make sure the screw head is flush or lower than the cement board. A Ryobi impact driver is essential for this part. When laying the cement board stagger them, you should never have 4 corners meet. Never lay a seam of cement board on a seam in the plywood. If this is going to happen, cut your cement board to miss the plywood seam. Leave a 1/8" or so gap between cement boards and between wall edges. Try and remove any thinset squeeze out while wet. Let the thinset cure for a 24 hours before laying the tile.

  5. Step: 5
    Huge 088fc208 3f2e 45ee 9e2c 9083c4e90ed1

    Fill the cement board gaps with thinset, and then apply the 2" glass seam tape over the joint. Cover the seam tape with thinset, and smooth the joint. Try not to leave high points.

  6. Step: 6
    Huge 636c8bf3 1b93 45a9 accd 5ca0263be6e8

    Time to cut tiles! For the herringbone inserted, mark the tiles in half (8”) and for every 2 tiles that you cut in half cut 1 tile in quarters. When making the cuts you can either mark the cut lines with a pencil or set up your saw fence for repeat cuts.

  7. Step: 7
    Huge ba969830 702b 49bf b7d1 ac8d51a0d2ba

    Fill your tile saw reservoir with water, check and refill the reservoir after every 4-5 tiles. When cutting natural stone, I like to make a small cut on one end, then turn the tile around and make the cut. This helps with breakout of the stone. Rinse the tiles with water after cutting.

  8. Step: 8
    Huge 4b5d28b4 31a7 4991 a730 3fda066ae2e6

    Decide how you want your floor laid out. Use chalk lines to mark straight lines. For this layout using 16” x 16” tiles and 1/8” tile spacers, the spacing between center-lines of the diamonds is about 17 1/8”. These are the reference lines that keep the pattern going straight.

  9. Step: 9
    Huge eb1933ed 7841 4c54 b7dd 51998cbcaea6

    Mix a batch of thinset according to the instructions on the bag. Spread the thinset with a ¼” x 3/8” x ¼” trowel. Begin setting the travertine tiles in the pattern. If your travertine tiles are very holey on the backside, it will be easier to keep your tiles level by filling the holes with a thin coat of thinset.

  10. Step: 10
    Huge 4fca5c7a b51a 4d00 8268 d6a8a76dc148

    Check and make sure your tiles are level. If you have a dipping edge that you can't get level, sometimes you can lift the edge with your spatula and put a glob of thinset under it, and lay the tile back down and level it. As you lay the tiles, your thinset may start getting dry. The thinset it too dry when you lay the tile on the troweled thinset and lift it up, if the thinset doesn't leave messy lines and adhere to the tile bottom don't continue to use it. Make a new batch.

  11. Step: 11
    Huge 68b8d19f 3b46 448d afff 3daecf778ef5

    Allow the thinset to cure for 48 hours before walking on the tiles and grouting. The general rule of thumb for grout, is lines larger than 1/8" use sanded grout and lines 1/8" and smaller use unsanded grout. I prefer to do small batches of grout at a time, ¼ of the bag. Using your grout float, fill the grout line very full of grout. With the side of the float, squeegee off the excess grout. Let the grout lines dry for a while 30 min to 1 hr.

  12. Step: 12
    Huge 7cb265d4 3e5a 4c51 a5f0 4a851a1a0d31

    With an extra large orange grout sponge and a bucket or large bowl of clean water, wipe up the excess grout. Keep wiping until the grout is at the height that you prefer, generally just below the top of the tile. Change your water often and wipe all of the residue from the grout off of the tile. Let the tiles dry for a couple of days. Clean the tiles again really well with water and a sponge. Let the water dry and reapply the natural stone and grout sealer according to the instructions on the bottle.