Add Your Project

Garage

Garage

Garage

Difficulty

Hours

Cancel
  • I've told Tom already! You guys did an awesome job on the Dream Shop! I actually took the idea of having things on wheels and keeping them the same height. Obviously, my room is a lot smaller, but the idea is what made it work! Great job!
    By MommasAryobiToolJunkie, on February 7, 2018
    • That's great to hear, @MommasAryobiToolJunkie!
      By RYOBI NATION, on February 8, 2018

  • Where can I find the plans for all these ideas? Thank you
    By TroyFowler, on February 11, 2018
    • @TroyFowler you should be able to click the link above that says "view Project PDF" or visit the Dream Workshop website here: https://www.ryobitools.com/nation/dreamworkshop
      By RYOBI NATION, on February 12, 2018

  • The Miter saw cart in the PDF is listed as being 36" tall, which is the same as the table saw cart and supplemental carts, that way they can be used together. However, it doesn't look like the height of the table saw and height the miter saw were taken into account during these measurements. For the tables to align when working with material. Did I miss that in the steps somewhere? Do I need to shorten the measurements based off of how tall my tools are? I imagine for the miter saw I would need to shorten the height by a few inches and for the table saw closer to a foot-foot and half, this way I could place the material over the carts and it'll still lay flush with the saws. Any help would be appreciated.

    Thanks!

    By Jakers, on October 10, 2018
View All Comments
Cancel
  • Quick question- how do you deal with the saw dust from underneath the saw?
    By jkealey, on February 8, 2018
    • We have various vacuum products that work great in the shop for both sawdust and even larger debris.You can check them out on the RYOBI website here: https://www.ryobitools.com/power-tools/products/list/category/vacuums
      By RYOBI NATION, on February 9, 2018
View All Comments
Cancel
  • I absolutely love this lazy Susan idea. I have a small work area, but this will definitely maximize my efficiency. Thank you Mrs. White
    By jester5042, on February 10, 2018
View All Comments
Cancel
  • Hi Ana, Greetings from Montreal, Canada! Great project! I was taking a look at the shelves and was wondering... is the left part really 8 feet long? If both your carts are 40 inches long and you add both 2x4 (7 inches total), I come up with 87 inches total... There is a difference of 9 inches. I want to know because my garage wall is a bit small for a 16 feet unit and it would actually be a good thing if it was smaller than what is written on the plan! Can you detail the dimensions of the whole unit so I can check if it fits my space? Thank you so much!
    By Ian Charette-Brousseau, on January 8, 2018
    • Hi Ian! Glad you're a fan of this project! If you haven't already, check out the blue "View Project PDF" link above that gives more details that may be helpful. The total dimensions of this project are: 192 x 24 x 84
      By RYOBI NATION, on January 9, 2018
    • There is no PDF link for this project! Can this be added or emailed. Interested in constructing this, but would like the detail information in the PDF. Thank you
      By eringale, on February 21, 2018
    • You can view more of the steps under when you click the "Project Steps" tab under the video!
      By RYOBI NATION, on February 21, 2018

  • Hi, I just completed the project. Although mine is not for a shop but rather for storage. It will be for a shop once I convince my wife to get rid of everything. One note on the plans: the materials page says 3/8 plywood is used (which I purchased) and in the steps it says 1/2 inch plywood was used for the shelves. I wish I would have read through the plans first as 3/8 inch plywood is pretty flimsy but functional for light items. Overall, great plans so thanks for sharing! Chris
    By Chris Tab, on January 16, 2018

  • Where are the pdf plans I can download for these shelves? Thanks!
    By mshuntinglady, on March 27, 2018
    • There is no pdf for this one. Just "project steps" that you can click through, as well as videos that walk you through it.
      By RYOBI NATION, on April 18, 2018

  • I can't find the .pdf for the Built-in shelves.  Where is it?
    By cayoder, on April 15, 2018
    • Hi cayoder! There is no pdf for this one. Just "project steps" that you can click through, as well as videos that walk you through it.
      By RYOBI NATION, on April 18, 2018

  • Am I missing something? 12 2x4s seems a little short for the project. Was gonna hit HD tomorrow, but I guess I’m glad I double checked the math. 
    By DescentFormula, on April 29, 2018
    • Hi @DescentFormula It has been updated to 20 2x4s. Thanks for asking.
      By RYOBI NATION, on May 14, 2018

  • Thanks for the guide. I'm going to be attaching this to a cinder block garage wall, will I need different screws to hold the wood to the wall?

    Thanks
    By hurricanedj, on May 9, 2018
    • Hi @hurricanedj we reccommend using tapcon concrete screws. You may consider using a hammer drill and drilling pilot holes first. 
      By RYOBI NATION, on May 11, 2018
View All Comments
Cancel
  • My Hubby's dream. Gaming and space for his tools...awesome! But I already told you that on IG!
    By MommasAryobiToolJunkie, on February 7, 2018

  • Awesome project! I'd love to redo my garage with all these ideas.
    By grimreaper, on February 27, 2018

  • What is the wall paint color?
    By mahlesalvage, on March 1, 2018

  • What is the wall color you used
    By mahlesalvage, on March 8, 2018

  • My garage is finished so I do not have the height needed to do this. I would need to make it no higher than 7 foot to allow for the barn door hardware, would I just change the dimensions from 8 foot to 7? Or 84 X 24 x 84? Thanks
    By steve57, on March 10, 2018
    • Sorry for the late reply. I would buy the barn door hardware first then mock it up to see the clearence you want. You may need to leave some room to get the door on and off the track. Good luck!
      By Tom Bury, on April 5, 2018
View All Comments
Cancel
  • This is such a cool and versatile design. I especially like the hidden storage and chalkboard.
    By grover959, on January 7, 2018

  • How much weight does this table hold?
    By mrsdiy, on January 17, 2018
    • We haven't done weight testing on it to give you an exact answer, but it is a very sturdy table!
      By RYOBI NATION, on February 8, 2018


  • Where do you find the plans?
    By masswood, on February 8, 2018
    • @masswood You can find the plans on RYOBI Nation's Dream Workshop website here:https://www.ryobitools.com/nation/dreamworkshop
      By RYOBI NATION, on February 9, 2018

  • What is the wall paint color?
    By mahlesalvage, on March 1, 2018

  • Great idea and very useful! 
    By Jgarcia779, on April 23, 2018
View All Comments
1 3

back to top?

Asset 1

Join RYOBI Nation

We're so glad you're here! Let's get started.

Welcome

Add An Avatar:

Help your fellow Nation members get to know you by adding a picture of yourself to your profile.

Upload Image

Welcome

Let's build your project feed!

Select some categories to pick the kinds of projects that show up on your home page:


Welcome to Nation

welcome_r2 graphic
Welcome to your RYOBI Nation quick start guide, a fast and easy way to see everything that's waiting for you!
project_feed_r1 graphic
Your feed shows the latest projects from the categories you’ve selected, right on your homepage!
upload_r2 graphic
Are you working on something awesome? Upload your DIY projects today, and share with other members.
contests_r2 graphic
We award monthly and annual prizes for the best projects, worth up to $2500 in RYOBI tools! That’s a lot of hardware, and it could all be yours.
connect_r2 graphic
RYOBI Nation is a positive connection between people who are creating great things.
You can follow fellow members, like their projects, and comment to let them know they’re doing a great job.
notifications_r1 graphic
Come back to RYOBI Nation often to see what is new and to stay in touch.
If you're on a mobile device, don't forget you can add RYOBI Nation to your home screen for quick access to your project feed.

Update Image