Step 1
Mark and draw lines on the 2x4 at 14.5" x 28" for the back piece. Then, mark 5.5" x 9" four times for the shelf pieces. Lastly, mark 5.5" x 14.5" for two larger shelves. Make cuts.
Step 2
Use 220 grit sandpaper to thoroughly sand all of the pieces of wood to prepare for staining.
Step 3
Drill pocket holes on each of the shelves using a pocket hole guide.
Step 4
Drill even holes on each of the shelves according to the wine bottle sizes.
Step 5
Mark the dowel sixteen times each at 2." Cut the dowel along all of the marked lines.
Step 6
Apply stain to all of the wood pieces, including the dowel pieces.
Step 7
Insert the dowel pieces into the holes drilled in step 4.
Step 8
Apply wood glue to each of the shelves and press onto the back board. Drive screws into the pocket holes on the shelves to attach them to the board. Allow 24-48 hours for the glue to dry fully
Difficulty Level - Easy
DIY Wine Rack
Display your wine bottles beautifully with this DIY Wine Rack!
